TTD series insulation piercing clamp
Overview
Main line: insulated copper or aluminum
Branch line: insulated copper or aluminum
Can be operated with electricity or power failure
The main body of the piercing clamp is made of high-strength, mechanical and weather-resistant insulating materials.
The screws equipped with tightening torque nuts are treated with anti-corrosion. The torque nuts make installation easier, safer and faster. Its constant puncture pressure can ensure that the cable connection achieves the best electrical effect.
The puncture clamp is waterproof and can withstand a voltage of 6kV in water without breakdown.
The end cap of the waterproof branch line is sealed to prevent water from entering the branch wire. It can be branched on the left or right as needed.
WX1 Insulation Piercing Clamp Selection Table
model |
Equivalent model |
Main line (mm²) |
Branch (mm²) |
Maximum current (A) |
bolt |
Torque nut |
|
Quantity |
H(mm) |
||||||
WX041FJ |
TTD041FJ |
6-35 |
1.5-10 |
86 |
1×M8 |
13 |
F1309 |
WX051FJ |
TTD051FJ |
16-95 |
1.5-10 |
86 |
1×M8 |
13 |
F1309 |
WX101FJ |
TTD101FJ |
6-50 |
2.5(6)-35 |
200 |
1×M8 |
13 |
F1314 |
WX151FJ |
TTD151FJ |
25-95 |
2.5(6)-35 |
200 |
1×M8 |
13 |
F1314 |
WX201FJ |
TTD201FJ |
35-95 |
25-95 |
377 |
1×M8 |
13 |
F1318 |
WX251FJ |
TTD251FJ |
50-150 |
25-95 |
377 |
1×M8 |
13 |
F1318 |
WX271FJ |
TTD271FJ |
35-120 |
35-120 |
377 |
1×M8 |
13 |
F1318 |
WX281FJ |
TTD281FJ |
50-185 |
2.5(6)-35 |
200 |
1×M8 |
13 |
F1314 |
WX401FJ |
TTD401FJ |
50-185 |
50-150 |
504 |
2×M8 |
13 |
F1318 |
WX431FJ |
TTD431FJ |
70-240 |
16-95 |
377 |
2×M10 |
17 |
F1720 |
WX441FJ |
TTD441FJ |
95-240 |
50-150 |
504 |
2×M10 |
17 |
F1725 |
WX451FJ |
TTD451FJ |
95-240 |
95-240 |
530 |
2×M10 |
17 |
F1725 |
WX551FJ |
TTD551FJ |
120-400 |
95-240 |
679 |
2×M10 |
17 |
F1737 |
Overview
It is used for the branch connection of insulated cables in building power distribution systems, the connection of low-voltage overhead insulated cables, the branch connection of low-voltage insulated household cables, and street lamp power distribution systems.
Main line: insulated copper or aluminum
Branch line: insulated copper or aluminum
Can be operated with electricity or power failure
The main body of the piercing clamp is made of high-strength, mechanical and weather-resistant insulating materials.
The screws equipped with tightening torque nuts are treated with anti-corrosion treatment, which makes the installation of torque bolts easier, safer and faster, and its constant puncture pressure can ensure the cable connection
WX1 fire-resistant flame-retardant insulation piercing clamp selection table
model |
Equivalent model |
Main line (mm²) |
Branch (mm²) |
Maximum current (A) |
bolt |
Torque nut |
|
Quantity |
H(mm) |
||||||
WX041FV0 |
TTD041FV0 |
6-35 |
1.5-10 |
86 |
1×M8 |
13 |
F1309 |
WX051FV0 |
TTD051FV0 |
16-95 |
1.5-10 |
86 |
1×M8 |
13 |
F1309 |
WX101FV0 |
TTD101FV0 |
6-50 |
2.5(6)-35 |
200 |
1×M8 |
13 |
F1309 |
WX151FV0 |
TTD151FV0 |
25-95 |
2.5(6)-35 |
200 |
1×M8 |
13 |
F1314 |
WX201FV0 |
TTD201FV0 |
35-95 |
25-95 |
377 |
1×M8 |
13 |
F1318 |
WX251FV0 |
TTD251FV0 |
50-150 |
25-95 |
377 |
1×M8 |
13 |
F1314 |
WX271FV0 |
TTD271FV0 |
35-120 |
35-120 |
377 |
1×M8 |
13 |
F1314 |
WX281FV0 |
TTD281FV0 |
50-185 |
2.5(6)-35 |
200 |
1×M8 |
13 |
F1314 |
WX401FV0 |
TTD401FV0 |
50-185 |
50-150 |
504 |
2×M8 |
13 |
F1318 |
WX431FV0 |
TTD431FV0 |
70-240 |
16-95 |
377 |
2×M10 |
17 |
F1720 |
WX441FV0 |
TTD441FV0 |
95-240 |
50-150 |
504 |
2×M10 |
17 |
F1725 |
WX451FV0 |
TTD451FV0 |
95-240 |
95-240 |
530 |
2×M10 |
17 |
F1725 |
WX551FV0 |
TTD551FV0 |
120-400 |
95-240 |
679 |
2×M10 |
17 |
F1737 |
Installation of WX1 fire-resistant and flame-retardant insulation piercing clamp
1. Unscrew the wire clamp first.
2. Clamp the main line into the main line groove, and do not twist the main line with the knife ruler. Pay attention to whether the wire diameter range corresponds to this wire clamp.
3. Put the branch line into the branch line slot. The matters needing attention are the same as above.
4. Tighten with a socket wrench. Disable the open-end wrench.
5. When tightened to a certain strength, the constant torque nut is broken. as the picture shows.
6. The effect after installation.