-
GTLA/GTLC copper and aluminum cable lug
For electric energy meter TYPE Cross-Section (mm²) Dimension (mm) L d D GTLA-10 10 50 5 7.0 GTLA-16 16 50 6 7.0 GTLA-25 25 50 7 7.0 GTLA-35 35 52 8 7.0 GTLA-50 50 56 9 7.0 For air switch circuit breaker TYPE Cross-Section (mm²) Dimension (mm) L d D GTLC-10 10 45 5 7.0 GTLC-16 16 45 6 7.0 GTLC-25 25 45 7 7.0 GTLC-35 35 45 8 7.0 GTLC-50 50 45 9 7.0 -
-
Loadbreak Elbow Connector
Loadbreak Elbow Connector is fully insulated, fully sealed connector, is widely used in outdoor power distribution transformer, American cabinet type
transformer, ring main unit and cable branch box, buried transformers and other electrical equipments. It can be installed on outgoing line of 200AT type connector, 200A busbar, single-pass(Double type) apparatus bushing and load conversion connector of American cabinet type transformer.
Test points can be installed live monitor, in order to check the charged state of the equipment, but also to meet the nuclear phase requirements.
Conductive rod connector arc extinguishing material, it can be charged in the state operation, but can not cut off the short-circuit current; can be used as the load switch to open the current 200A.
Applicable for XLPE cable cross-section 25mm2-400mm2
-
Euromold Screened Separable Connectors
Euromold Screened Separable Elbow Connector designed for MV termination of polymeric insulated (XLPE and EPR) medium voltage 6.6kV, 11kV, 15kV, 17.5kV, 22kV cables to equipment bushings including transformers, switchgear, motors. Can also be used to connect cable to cable, using the appropriate mating part.
-
Nylon cable tie
There are many different types of cable ties on the market today. Some deal with extreme temperatures while others provide the ability to hold heavy loads securely. Here is our Products, we carry a large variety of cable ties. Below are descriptions of some of the cable ties we carry. When available, we have given their environmental operational temperatures and tensile strength so you will be able to pick the perfect cable tie for you need for your job.
-
Lightning protection punctures pin insulators
Under normal conditions, lightning discharge gap insulator does not move; only exceeds the lightning overvoltage occurs, the ground electrode arc gap fork can break down to form a short-circuit channel. The arc fork successive frequency arc burning it online clip on, release over voltage energy to protect the wire from burns.
The main feature of 10KV lightning protection punctures pin insulators:
Trough punctures needle electrode teeth using a MiG-shaped layout, easier to puncture the wire insulation, and reduces damage to the wire.
Having a high mechanical strength, reliable electrical contact.
Arc fork and the ground electrode can be easily replaced to install and easy to maintain.10KV lightning protection punctures pin insulators, unique arc fork closely linked through the upper end of the bolt and the insulator fittings.
-
Lightning Protection Composite Insulator
Lightning protection composite insulator is a new type of combined structure of arc-proof insulator, which is mainly composed of insulating shroud, compression nut, briquetting block, moving briquetting block, upper metal cap, composite insulator, arc striking rod, insulating sleeve and The lower metal foot is composed of the same, and the arc striking rod and the upper metal cap are assembled and integrated into one body. When a lightning strike occurs, the arc striking rod and the lower metal leg are discharged, so that the freewheeling power frequency arc is moved to the arc striking rod to burn, thereby protecting Insulated wires are not damaged.
-
Right Angle Hanging Board
Provide a variety of standard models of products, price concessions, quality assurance, accept small orders, look forward to your visit. The right-angle hanging plate is an important part of the connection hardware. Its manufacturing material is hot-dip galvanized steel, which is a plate-shaped…
-
Bow Shackle Chain Link
Specifications: A shackle, is a U-shaped piece of metal secured with a clevis pin or bolt across the opening, or a hinged metal loop secured with a quick-release locking pin mechanism. Shackles are the primary connecting link in all manner of rigging systems, from boats and ships to industrial crane rigging, as they allow different rigging subsets to be connected or disconnected quickly. We have many types shackle, and we also do customize for our clients to match their requirements.
-
Socket Eye
Socket tongue also is called socket eye, it is a major hardware in powerline and transmission line system. It can be casting or forging. We have many types of socket tongue, we also do customize for our clients to match their requirements.
General Material
-Body Steel Material
- Clip Stainless, Bronze Strength Rating 70KN, 120KN, 180KN
Finishing Hot Dip Galvanize
We always pay great attention to the quality of our products.
All insulators are subject to 100% stringent IEC or ANSI st…
-
Overhead Hot-dip Galvanized Steel Ball Eye
Ball Eye is a common hardware in powerline and transmission line system, and it is also called Eye Ball. It normally used with disc insulators. We have many types Ball Eye, we also do customize for our clients. General Material-Body Steel Strength Rating 70KN, 120KN, 180KN Finishing Hot Dip Galvanize Strain clamp specification: there are two basic strain clamp systems, 1. Detachable clamps, such as wedge type tension clamps, thimble, bolt type tension clamps, can be adjusted later. …
-
Mechanical lug Shear Bolt Lug
Mechanical connectors are designed for use in LV and MV applications.
The Connectors consist of a tin-plated body, shear-head bolts and inserts for small conductor sizes. Made of special aluminium alloy, these contact bolts are shear-head bolts with hexagon heads.
The bolts are treated with a lubricating wax. Both versions of contact bolts removable/ irremovable are available.
The body is made of a high-tensile, tin-plated aluminium alloy. The internal surface of the conductor holes is grooved. Lugs are suitable for outdoor and indoor applications and are available with different palm hole sizes.
