PriceList for Tree Grip Dead End - Preformed guy grip with dead end clamp – Waxun
PriceList for Tree Grip Dead End - Preformed guy grip with dead end clamp – Waxun Detail:
Overview
The preformed dead end grips are designed to be applied directly to bare galvanized steel guy wire, overhead earth wire and wire rope. The preformed dead end grips must only be used once and will hold 100% of the guy wire’s rated strength when correctly installed.
Preformed dead end grips should be used only on the size and type of guy wires for which they are designed. All preformed dead end grips have color coded markings to indicate the starting point for application and to assist in product identification.
Features
1. High quality aluminum clad steel and galvanized steel which improves the mechanical propertied and corrosion resistance of wire clips.
2. The contact area of the optical fiber cable is increased so that the force distribution is uniform and the stress concentration point is not concentrated.
3.The wire clip is simple to install and does not require any professional tools. It can be done independently by one person. It has good installation quality and convenient for inspection.
AND cable dead end clamp | |||||
Type | Cable dia.(mm) | Length of Rods(mm) | Weight(kg) | Universal scheme | |
Clevis | Thimble | ||||
AND 0950 | 9.0-9.5 | 800 | 0.38 | U-7 | TC-04 |
AND 1050 | 9.6-10.5 | 850 | 0.49 | U-7 | TC-04 |
AND 1160 | 10.6-11.6 | 900 | 0.52 | U-7 | TC-04 |
AND 1280 | 11.7-12.8 | 960 | 0.65 | U-7 | TC-04 |
AND 1410 | 12.9-14.1 | 1080 | 0.82 | U-7 | TC-04 |
AND 1560 | 14.2-15.6 | 1160 | 1.22 | U-7 | TC-04 |
Structure and Raw Material:
Shackle–Hot dip galvanized steel. Shackle is connected with Reinforcing Pole units.
Twisted Chain Link–Hot dip galvanized steel. Twisted Chain Link is intended for connecting U- Shackle and Clevis Thimble.
Thimble—Hot dip galvanized cast steel. Thimble is plugged in shackle of Tension Clamp for protection and connection.
Armor Rods—– Aluminum clad steel wire. Armor Rods increase friction with a layer of particle emery inside to cables. Rods are assembled into four subsets in workshop which reduce misalignment errors and speeds installation. The ends are bent outward to provide stress relief at the critical cable departure areas.
Preformed Dead End — Preformed Dead End are made of hot dip galvanized steel wire or aluminum clad steel wire, it is assembled into one subset with a layer of firm emery inside in workshop, in order to increase gripping strength of Tension Clamps while decreasing side pressure
Product detail pictures:
Related Product Guide:
With our rich working experience and thoughtful companies, we have now been recognized as being a trustworthy supplier for a lot of global potential buyers for PriceList for Tree Grip Dead End - Preformed guy grip with dead end clamp – Waxun, The product will supply to all over the world, such as: New Delhi, Oman, Birmingham, We integrate all our advantages to continuously innovate, improve and optimize our industrial structure and product performance. We will always believe in and work on it. Welcome to join us to promote green light, together we will make a better Future!
By Dominic from Poland - 2017.12.02 14:11
As an international trading company, we have numerous partners, but about your company, I just want to say, you are really good, wide range, good quality, reasonable prices, warm and thoughtful service, advanced technology and equipment and workers have professional training, feedback and product update is timely, in short, this is a very pleasant cooperation, and we look forward to the next cooperation!
By Renee from Belgium - 2018.06.03 10:17