Preformed guy grip with dead end clamp

Short Description:

The preformed tension set is widely used for the installation of bare conductors or overhead insulated conductors for transmission and distribution lines, the reliability and economic performance of the product is better than the bolt type and hydraulic type tension clamp that widely used in the current circuit.
Innovative structure and precision design, so that the preformed tension set has a reliable performance and it is usually made of aluminum clad steel, galvanized steel wire and other materials.

Tension Clamps are designed to connect ADSS cables and poles/towers . Armor rods can provide protection and cushioning to the ADSS cables. The special design of Preformed rods makes ensure that Tension Clamps can’t cause undue stress to the ADSS cables, so as to ensure the normal lifetime of cables system.

Preformed line material: Aluminum clad steel wire or galvanized steel wire.

Send email to us

Product Detail

Product Tags

Overview

The preformed dead end grips are designed to be applied directly to bare galvanized steel guy wire, overhead earth wire and wire rope. The preformed dead end grips must only be used once and will hold 100% of the guy wire’s rated strength when correctly installed.

Preformed dead end grips should be used only on the size and type of guy wires for which they are designed. All preformed dead end grips have color coded markings to indicate the starting point for application and to assist in product identification.

Features

1. High quality aluminum clad steel and galvanized steel which improves the mechanical propertied and corrosion resistance of wire clips.

2. The contact area of the optical fiber cable is increased so that the force distribution is uniform and the stress concentration point is not concentrated.

3.The wire clip is simple to install and does not require any professional tools. It can be done independently by one person. It has good installation quality and convenient for inspection.

AND cable dead end clamp
Type	Cable dia.（mm）	Length of Rods（mm）	Weight（kg）	Universal scheme
Type	Cable dia.（mm）	Length of Rods（mm）	Weight（kg）	Clevis	Thimble
AND 0950	9.0-9.5	800	0.38	U-7	TC-04
AND 1050	9.6-10.5	850	0.49	U-7	TC-04
AND 1160	10.6-11.6	900	0.52	U-7	TC-04
AND 1280	11.7-12.8	960	0.65	U-7	TC-04
AND 1410	12.9-14.1	1080	0.82	U-7	TC-04
AND 1560	14.2-15.6	1160	1.22	U-7	TC-04

Structure and Raw Material:
Shackle–Hot dip galvanized steel. Shackle is connected with Reinforcing Pole units.
Twisted Chain Link–Hot dip galvanized steel. Twisted Chain Link is intended for connecting U- Shackle and Clevis Thimble.
Thimble—Hot dip galvanized cast steel. Thimble is plugged in shackle of Tension Clamp for protection and connection.
Armor Rods—– Aluminum clad steel wire. Armor Rods increase friction with a layer of particle emery inside to cables. Rods are assembled into four subsets in workshop which reduce misalignment errors and speeds installation. The ends are bent outward to provide stress relief at the critical cable departure areas.
Preformed Dead End — Preformed Dead End are made of hot dip galvanized steel wire or aluminum clad steel wire, it is assembled into one subset with a layer of firm emery inside in workshop, in order to increase gripping strength of Tension Clamps while decreasing side pressure