Kayan aikin injiniya Shear Bolt Lug

Mechanical lug Shear Bolt Lug Featured Image

Takaitaccen Bayani:

An tsara masu haɗin injina don amfani a aikace-aikacen LV da MV.

Masu haɗawa sun ƙunshi jikin da aka yi da gwangwani, ƙwanƙwasa-kai da abin sakawa don ƙananan masu girma dabam.An yi shi da gawa na musamman na aluminum, waɗannan kusoshi na tuntuɓar ƙwanƙwasa-kai ne masu kawuna hexagon.

Ana bi da kusoshi tare da kakin zuma mai shafawa.Duk nau'ikan kusoshi na lamba masu cirewa/marasa cirewa suna samuwa.

Jikin an yi shi ne da wani babban ɗaki mai ɗaki mai ƙyalli na aluminum.Wurin ciki na ramukan madugu yana tsagi.Lugs sun dace da aikace-aikacen waje da na cikin gida kuma ana samun su tare da girman rami na dabino daban-daban.

Aika mana imel

Cikakken Bayani

Tags samfurin

Dubawa

An ƙera tashoshi na Torque na musamman don gudanar da haɗin kai tsakanin wayoyi da kayan aiki.
Hanyar musamman ta ƙwararraki na musamman tana samar da daidaitaccen ra'ayi da ingantaccen tsari.Idan aka kwatanta da ƙugiya na ƙugiya na gargajiya, yana da sauri da inganci sosai, kuma yana tabbatar da ƙayyadaddun ƙayyadaddun lokacin juzu'i da ƙarfin matsawa.
Tashar wutar lantarki an yi ta ne da gwangwani-plated aluminum gami da saman bango mai siffar tsagi na ciki.
Babban abin lura shi ne cewa zai iya ajiye aiki da haɓaka aikin lantarki da na inji.
Material: gwangwani aluminum gami
Zafin aiki: -55 ℃ zuwa 155 ℃ -67 ℉ zuwa 311 ℉
▪ Matsayi: GB/T 2314 IEC 61238-1

Features da abũbuwan amfãni

▪ Faɗin aikace-aikace
▪ Karamin ƙira
Ana iya amfani da shi da kusan kowane nau'in madugu da kayan aiki
∎ Matsakaicin jujjuyawar kai na goro yana ba da garantin kyakkyawan aikin sadarwar lantarki
▪ Ana iya shigar da shi cikin sauƙi tare da madaidaicin maƙallan soket
▪ Ƙirar da aka riga aka tsara don ingantaccen shigarwa akan igiyoyi masu matsakaicin ƙarfin lantarki har zuwa 42kV
▪ Kyakkyawan ƙarfin tasiri na yau da kullun da na ɗan gajeren lokaci

Dubawa

Jikin tasha an yi shi ne da gawa mai ƙyalli mai ƙyalli mai tsayin daka.Tashar tashar ta dace da aikace-aikacen waje da na cikin gida, kuma tana iya samar da ƙayyadaddun girman girman daban-daban.

Tuntuɓi maƙarƙashiya mai ƙarfi
An yi shi da gawa na musamman na aluminium, waɗannan kusoshi na tuntuɓar kai mai kauri mai kauri biyu ne.Ana kula da waɗannan kusoshi tare da mai mai inganci kuma an sanye su da zoben lamba na musamman.Da zarar an yanke kan gunkin, ba za a iya cire waɗannan kusoshi ba.
Plug-in
Filogi na musamman, saka ko cirewa don daidaita kewayon madugun da ya dace.Waɗannan abubuwan da aka saka duk suna da ratsi na tsayi da ramin sakawa.

Features da abũbuwan amfãni daga inji lugs da haši	Aiki
Wide aikace-aikace kewayon da karfi versatility	Misali, ƙayyadaddun ƙayyadaddun abubuwa guda uku na iya rufe 25mm2 zuwa 400mm2 madugu,
Jikin an yi shi da babban tinned aluminum gami	Kuma ana iya amfani dashi da kusan kowane nau'in madugu da kayan aiki.
An yi maƙallan na musamman na aluminum gami	Kyakkyawan halayen hulɗa, na iya gane haɗin tsakanin mai sarrafa jan karfe da mai sarrafa aluminum.
Karamin ƙira	Kawai buƙatar ƙaramin sarari shigarwa, musamman dacewa da manyan aikace-aikace.
Tsarin karkace na Tubular a cikin jiki don inganta aikin lamba	Kyakkyawan aikin lantarki.
Ramin tsakiya da sakawa	An raba Layer oxide mai jagora.
Matsakaicin jujjuyawar kai goro	Wurin filogi yana daidaita girman haɗin haɗin ko tasha wanda ya dace da ƙarin nau'ikan wayoyi.
Man goro	Abubuwan da ake sakawa suna taimakawa madugu ya zama mafi kyawu a tsakiya kuma ba zai lalata madubin ba lokacin da aka ɗaure kusoshi.
Musamman fasali na inji tashoshi
Dogon rikewa	Tare da karin tsayi mai tsayi, ana iya amfani da shi azaman shingen danshi
A kwance hatimi ya dace	Ya dace da aikace-aikacen gida da waje

shigarwa

Babu kayan aiki na musamman da ake buƙata don shigarwa, maɓallan soket kawai ake buƙata don shigarwa;
Kowane nau'i yana amfani da tsayin da aka rage guda ɗaya, gami da samar da abubuwan da aka saka;
∎ Tsararriyar ƙayyadaddun ƙayyadaddun juzu'in almakashi na goro don tabbatar da amintaccen haɗin gwiwa da tabbatacce;
Kowane mai haɗawa ko igiya na kebul yana da umarnin shigarwa daban;
Muna ba da shawarar amfani da kayan aikin tallafi (duba abin da aka makala) don hana madugu daga lankwasa.

Tebur na zaɓi

Samfurin samfur	Wurin giciye mm²	Girman (mm)				Ramin hawa diamita	Tuntuɓi kullin Yawan	Bayanan kai na Bolt AF (mm)	Tsawon kwasfa (Mm)
Samfurin samfur	Wurin giciye mm²	L1	L2	D1	D2	Ramin hawa diamita	Tuntuɓi kullin Yawan	Bayanan kai na Bolt AF (mm)	Tsawon kwasfa (Mm)
BLMT-25/95-13	25-95	60	30	24	12.8	13	1	13	34
BLMT-25/95-17	25-95	60	30	24	12.8	17	1	13	34
BLMT-35/150-13	35-150	86	36	28	15.8	13	1	17	41
BLMT-35/150-17	35-150	86	36	28	15.8	17	1	17	41
BLMT-95/240-13	95-240	112	60	33	20	13	2	19	70
BLMT-95/240-17	95-240	112	60	33	20	17	2	19	70
BLMT-95/240-21	95-240	112	60	33	20	21	2	19	70
BLMT-120/300-13	120-300	120	65	37	24	13	2	22	70
BLMT-120/300-17	120-300	120	65	37	24	17	2	22	70
BLMT-185/400-13	185-400	137	80	42	25.5	13	3	22	90
BLMT-185/400-17	185-400	137	80	42	25.5	17	3	22	90
BLMT-185/400-21	185-400	137	80	42	25.5	21	3	22	90
BLMT-500/630-13	500-630	150	95	50	33	13	3	27	100
BLMT-500/630-17	500-630	150	95	50	33	17	3	27	100
BLMT-500/630-21	500-630	150	95	50	33	21	3	27	100
BLMT-800-13 (na al'ada)	630-800	180	105	61	40.5	13	4	19	118
BLMT-800-17 (na al'ada)	630-800	180	105	61	40.5	17	4	19	118
BLMT-800/1000-17	800-1000	153	86	60	40.5	17	4	13	94
BLMT-1500-17 (wanda aka yi da al'ada)	1500	200	120	65	46	17	4	19	130

Tashar wutar lantarki

Kayan aikin shigarwa da kuke buƙata:
▪ soket hexagon a daidai girman A/F
▪ maƙarƙashiyar berako maɓallan tasirin wutar lantarki
▪ an ba da shawarar sosai a yi amfani da na'urar don goyan bayan gunkin yanke idan akwai lanƙwasawa

Jagoran Shigarwa

1. Zaɓi madaidaicin girman tasha bisa ga jagorar zaɓin samfur.Bincika kuma tabbatar yana da girman waya iri ɗaya da wanda aka yiwa alama a cikin kebul da tasha.

Cire kundi mai ƙarfi har sai ya sami ɗakunan da kebul don sakawa

2. The conductor shear karshen uniformity.tsawon kwasfa na madugu wanda ya kamata a yanke yana nufin jagorar shawara.

kaucewa yanke madugu.

3.Inserting madugu a kasa na karfin juyi m a hankali.

4.tsara ƙugiya mai ƙarfi, gyara mai gudanarwa zuwa tasha.da kara matsa lamba daga 1-2-3

5. Don ƙara ƙararrawa ta hanyar ƙuƙwalwar ƙuƙwalwar ƙuƙwalwar ƙuƙwalwar ƙuƙwalwa ko ƙarfin wutar lantarki, sanya ƙarfin don daga 1-2-3, lokaci na farko mai ban tsoro, don amfani da karfin 15N.m don daga 1-2-3.

a yi amfani da karfin juzu'i na 15N.m domin daga 1-2-3 a karo na biyu, a yi amfani da karfin har sai an yanke kan bolt domin daga 1-2-3 a karo na uku.

Maimaita tsarin yankan har sai duk kusoshi sun sauka, kuma dole ne a yanke daga 1-2-3.Tabbatar gyara tasha a cikin tsarin yanke.

Tabbatar yana da isassun karfin juyi, baturin yana cikin babban kayan aiki.duba sakamakon yanke kuma cire man mai da ya rage.