Rarraba atomatik
Mai haɗawa ta atomatik | |||||
Nau'in | AAAC (mm²) | Wayar da aka keɓe ta sama (mm²) | ACSR (mm²) | Tsawon diamita (mm) | Launi |
GL-401 | 4.68-6.7 | Blue | |||
GL-402A | 16 | 16 | 16 | 5.59-6.35 | Ja |
GL-4042A | 35 | 35 | 35 | 5.59-8.13 | Ja |
GL-404A | 35 | 35 | 35 | 5.84-8.60 | Ja |
GL-406 | 50 | 50 | 50 | 9.02-10.16 | Yellow |
GL4076A | 9.02-11.94 | Yellow | |||
GL-407 | 70 | 70 | 70 | 10.16-11.94 | Baki |
GL-408 | 95 | 95 | 95 | 11.43-13.46 | Baki |
GL-4098 | 11.43-15.11 | Baki | |||
GL-409A | 120 | 120 | 120 | 12.83-15.11 | Baki |
GL-410 | 150 | 150 | 150 | 15.32-16.92 | Kore |
GL-411 | 150 | 150 | 150 | 16.74-18.39 | Kore |
GL-412 | 185 | 185 | 185 | 18.34-20.19 | Fari |
GL-413 | 240 | 240 | 240 | 19.81-21.79 | Fari |
GLT-1316A | -- | -- | 120 | -- | Launi na halitta |
GLT-1317A | -- | -- | 150 | -- | |
GLT-1319A | -- | -- | 240 | -- | Blue |
GLT-1333A+ | 300 | Don Allah a tuntube mu | 240 | 21.34-23.37 | Launi na halitta |
GLT-1355A+ | 300 | Don Allah a tuntube mu | 23.80-24.80 | Launi na halitta | |
GLT-1385A+ | 400 | Don Allah a tuntube mu | 25.3-26.19 | Launi na halitta | |
GLT-1441A+ | 500 | Don Allah a tuntube mu | 27.94-28.95 | Ja |
Dubawa
Aluminum Na atomatik Splicemai haɗin kebul ya dace don kiyayewa da gyara layin da aka karya ko sabon layi.Na'urar da ke dogara da tashin hankali wanda aka shigar da layin tare da aƙalla 10% ƙarfin ƙarfin waya don tabbatar da haɗin wutar lantarki mai dogara, kuma na yanzu shine ana watsa shi zuwa ɗayan ƙarshen ta hanyar shirin waya na wayar.Nau'in Taper Mai Haɗin gaggawa ta atomatik (cikakken mai haɗawa ta atomatik)
Siffar
1.Yana iya jure cikakken ƙarfin waya kanta
2.Hammer ƙirar gidaje yana tabbatar da ƙarfin ƙarfin ƙarfi ga waya
3.An shigar da shirin waya na ciki a cikin waya ta ciki
4. Yana iya samar da conductivity ba a rasa ga shugaba
5.The waya clip iya gudanar halin yanzu zuwa gidaje tare da mafi girma conductivity
6.The clamping jaws na waya clip iya shiga da saura oxide Layer a kan waya surface
7.Large lamba maki taimaka dissipate zafi
8.The meshing karfe matsa kula da kyau lantarki watsin karkashin daban-daban yanayi na tashin hankali bambancin
9.No musamman kayan aiki don shigarwa, babu crimping aiki
10.Convenient ga live aiki shigarwa
11.An sauƙaƙa matakan shigarwa kuma an inganta amincin aiki sosai
Jagoran Shigarwa
1. Cire fatar oxide tare da goga mai jagora.
2. Tabbatar cewa madugu yana da tsabta, madaidaiciya, babu bursu
3.Auna tsawon daga ƙarshen knurl zuwa ƙarshen jagorar mazurari, sannan a yi alama.
4. Ci gaba da saka mai gudanarwa zuwa tsakiyar tasha.Bayan haka a tabbata an gyara waya.