Lug càball DT / Terminals SC a’ ceangal Tube
Ro-shealladh
Bithear a’ cleachdadh luchd-ceangail crìochnachaidh gus stiùiriche tap a cheangal ri uidheamachd cumhachd (cruth-atharrachaidh, inneal-brisidh, inneal-brisidh, tionndadh dì-cheangail. msaa) no ris a h-uile preas den fho-stèisean.Thathas cuideachd a’ cleachdadh luchd-ceangail alùmanum gus an stiùiriche tap de T-connector a cheangal.Tha an luchd-ceangail a’ toirt a-steach seòrsa conpressive agus bolted, tha ceàrn 0 ° 30 ° agus 90 ° aig an dà sheòrsa le stiùireadh stiùiriche tap.
DT Aluminium càball lug
| DT Aluminium càball lug | |||||
| Seòrsa | Prìomh mheud (mm） | ||||
| Φ | D | d | L | L1 | |
| DT-4 | 6.2 | 4.8 | 3.1 | 21.0 | 6.4 |
| DT-6 | 6.2 | 5.5 | 3.8 | 24.0 | 9.0 |
| DT-10 | 6.2 | 6.8 | 1.8 | 25.5 | 10.0 |
| DT-16 | 8.2 | 7.5 | 6.5 | 30.5 | 12.0 |
| DT-25 | 8.2 | 9.0 | 7.0 | 34.0 | 14.0 |
| DT-35 | 10.5 | 10.5 | 8.2 | 38.0 | 14.0 |
| DT-50 | 10.5 | 12.5 | 9.8 | 45.0 | 18.0 |
| DT-70 | 12.5 | 14.5 | 11.5 | 50.0 | 18.6 |
| DT-95 | 12.5 | 17.5 | 13.8 | 55.5 | 23.5 |
| DT-120 | 12.5 | 19.5 | 15.5 | 63.0 | 24.0 |
| DT-150 | 16.5 | 20.5 | 16.5 | 71.0 | 26.0 |
| DT-185 | 16.5 | 23.5 | 18.8 | 78.0 | 33.0 |
| DT-240 | 16.5 | 26.5 | 21.0 | 92.0 | 37.0 |
| DT-300 | 16.5 | 30.0 | 24.0 | 102.0 | 39.5 |
| DT-400 | 16.5 | 34.0 | 26.5 | 113.0 | 46.0 |
| DT-500 | 20.5 | 38.0 | 30.0 | 123.0 | 50.0 |
| DT-630 | 20.5 | 45.0 | 35.0 | 135.0 | 58.0 |
Raon càball: 4-630mm2
Tube ceangail crìochnachaidh SC
Crìochan copair SC(JGY) a’ ceangal Tube
Feartan:
Tha JGY Copper Crimp Lug air a dhèanamh de le tiùb copair fìor-ghlan T2 99.9 sa cheud nas àirde agus air a chòmhdach le staoin.Teòthachd obrach -55 ℃ -150 ℃.
Iarrtas:
Tha JGY Copper Crimp Lugs freagarrach airson ceangal stiùirichean copair (earrann 1.5-1000mm2) ann an càball cumhachd le uidheamachd dealanach.
| SC Lug càball copair tana | ||||
| Seòrsa | Meud (mm) | |||
| Φ | D | d | L | |
| SC-1.5 | 4.2, 5.2 | 3.5 | 1.8 | 21.0 |
| SC-2.5 | 4.2, 5.2, 6.2 | 4.0 | 2.5 | 21.0 |
| SC-4 | 5.2, 6.2 | 4.8 | 3.1 | 21.0 |
| SC-6 | 5.2, 6.2, 8.2 | 5.5 | 3.8 | 24.0 |
| SC-10 | 6.2, 8.2 | 6.8 | 4.8 | 25.5 |
| SC-16 | 6.2, 8.2, 10.5 | 7.5 | 5.5 | 30.5 |
| SC-25 | 6.2, 8.2, 10.5 | 9.0 | 7.0 | 34.0 |
| SC-35 | 6.2, 8.2, 10.5, 12.5 | 10.5 | 8.2 | 38.0 |
| SC-50 | 8.2, 10.5, 12.5 | 12.5 | 9.8 | 45.0 |
| SC-70 | 8.2, 10.5, 12.5 | 14.5 | 11.5 | 50.0 |
| SC-95 | 10.5, 12.5 | 17.5 | 13.8 | 55.5 |
| SC-120 | 12.5, 16.5 | 19.5 | 15.5 | 63.0 |
| SC-150 | 12.5, 16.5 | 20.5 | 16.5 | 71.0 |
| SC-185 | 16.5 | 23.5 | 18.8 | 78.0 |
| SC-240 | 16.5 | 23.5 | 21.0 | 92.0 |
| SC-300 | 16.5, 20.5 | 30.0 | 24.0 | 102.0 |
| SC-400 | 16.5, 20.5 | 34.0 | 26.5 | 113.0 |
| SC-500 | 16.5, 20.5 | 38.0 | 30.0 | 123.0 |
| SC-630 | 20.5 | 45.0 | 35.0 | 135.0 |
| SC-800 | 22.5 | 50.0 | 39.0 | 170.0 |
| SC-1000 | 22.5 | 56.0 | 44.0 | 200.0 |
| SC Lug càball copair tana | ||||
| Seòrsa | Meud (mm） | |||
| Φ | D | d | L | |
| SC-1.5 | 4.2, 5.2 | 3.5 | 1.8 | 21.0 |
| SC-2.5 | 4.2, 5.2, 6.2 | 4.0 | 2.5 | 21.0 |
| SC-4 | 5.2, 6.2 | 4.8 | 3.1 | 21.0 |
| SC-6 | 5.2, 6.2, 8.2 | 5.5 | 3.8 | 24.0 |
| SC-10 | 6.2, 8.2 | 6.8 | 4.8 | 25.5 |
| SC-16 | 6.2, 8.2, 10.5 | 7.5 | 5.5 | 30.5 |
| SC-25 | 6.2, 8.2, 10.5 | 9.0 | 7.0 | 34.0 |
| SC-35 | 6.2, 8.2, 10.5, 12.5 | 10.5 | 8.2 | 38.0 |
| SC-50 | 8.2, 10.5, 12.5 | 12.5 | 9.8 | 45.0 |
| SC-70 | 8.2, 10.5, 12.5 | 14.5 | 11.5 | 50.0 |
| SC-95 | 10.5, 12.5 | 17.5 | 13.8 | 55.5 |
| SC-120 | 12.5, 16.5 | 19.5 | 15.5 | 63.0 |
| SC-150 | 12.5, 16.5 | 20.5 | 16.5 | 71.0 |
| SC-185 | 16.5 | 23.5 | 18.8 | 78.0 |
| SC-240 | 16.5 | 23.5 | 21.0 | 92.0 |
| SC-300 | 16.5, 20.5 | 30.0 | 24.0 | 102.0 |
| SC-400 | 16.5, 20.5 | 34.0 | 26.5 | 113.0 |
| SC-500 | 16.5, 20.5 | 38.0 | 30.0 | 123.0 |
| SC-630 | 20.5 | 45.0 | 35.0 | 135.0 |
| SC-800 | 22.5 | 50.0 | 39.0 | 170.0 |
| SC-1000 | 22.5 | 56.0 | 44.0 | 200.0 |
Raon càball: 1.5-1000mm2
