-
China Manufacturer for Abc Cable Insulated Tension Clamp - Plastic tension clamp – Waxun
AN-PA Plastic tension clamp Material Clamp body made of weather and UV resistance Polymer or aluminum alloy body with polymer wedge core. Adjustable link made of hot dip galvanized steel(FA) or stainless steel(SS). Features Tool free installation with wedges sliding inside the body. Easy to open bail permits fixing to brackets and pigtails Adjustable length of bail in three steps. AN-PA Plastic tension clamp Type AN-PA25-* AC-PAG25-* PA 25×100 Cable range(mm2) 2×1... -
Manufacturer for Mechanical Cable Lug - CPTAU series pre-insulated bimetallic cable lugs – Waxun
Standard: EN 50483-4. NF C33-021 characteristic 1. Insulating dysprosium aluminum terminal material: copper ≥ 99.9%, aluminum ≥ 99.5%: 2. The insulating sheath is made of high-strength weather-resistant engineering plastic through injection molding; 3. The identification on the insulating sheath is clear, and the identification information includes the specifications of the die, the order and times of crimping, the cross-sectional area of the conductor, and the length of the stripped wire; 4.... -
Popular Design for Preformed Guy Grip Dead End - Preformed dead end guy grip – Waxun
SHCO Preformed spiral suspension clamp Type SHCO cable dia 12.9-14.1mm Color marks Red Overall length 500mm Material Galvanized steel wire The wire suspension clamp are designed to connect ADSS cable to pole/tower in the straight line. They feature in handiness, ease, with certain load capacity to resist moving. Aluminum Alloy Preformed Dead End Guy Grip with Insulation Coating(SNAL) is for fixing terminals of the ground wire of overhead lines. The guy-grip dead end clamp fo... -
PriceList for Cable Thimble – Cold Shrinkable Cable Accessories – Waxun
Product introduction The cold shrink termination has excellent cold and heat performance, especially suitable for high altitude and cold areas, wet areas, salt spray areas and in heavily contaminated areas. ▪ Integrated molding：Integral casting，no gaps，high-safety electric cable ▪ Good water-resistant: Three layer waterproof technology for terminal head, Ensure excellent sealing and moistureproof performance with fingertip, Insulating tube and a sealed off pipe ▪ Shrink and compact : Liqui... -
New Arrival China Connector With Shear Head Bolts - BLMT/BLMC Mechanical Shear Bolt Lugs – Waxun
Overview Torque terminals are specially designed to handle the connection between wires and equipment. The unique shear bolt mechanism provides a consistent and reliable stopping point. Compared with traditional crimping hooks, it is super fast and super efficient, and ensures a consistent predetermined shear moment and compression force. The torsion terminal is made of tin-plated aluminum alloy and has an inner groove-shaped wall surface. The notable feature is that it can save labor and enh... -
Factory Free sample Disconnector Switch - composite polymer tension insulator – Waxun
FXBW-T-WQ Rod type composite bird proof insulator Introduction This product includes insulating Core, insulating housing & weather sheds and terminal assembly parts. 1. The Insulating Core: The insulating core is made of epoxy resin impregnated glass fiber by winding or extruding. Tensile strength is generally up to 1100Mpa or more, 3 times of the ordinary steel and 5 to 8 times of porcelain material. 2. The Housing and Weather Sheds: With the automatic silicone rubber injection molding... -
Rapid Delivery for Aluminum Alloy Insulation Anchor Clamps - Suspension Clamp – Waxun
What is a Suspension Clamp? A suspension clamp is a fitting that is designed for suspending or hanging cables or conductors to the pole. In other cases, the clamp can suspend cables to the tower. Since the cable is directly connected to the conductor, its specifications need to match with that of the cable so as to create a perfect connection. A suspension clamp hangs the cables at different points and angles depending on the requirements of the project. What are the Uses and Applications of ... -
Massive Selection for Hanging Cable Wedge Insulated Tension Clamp - Wedge Connector Crimp tools – Waxun
TYPE & SPECIFICATIONS USe for installing JXL series wedge Connector : JXL1, JXL-2. JXL-3,JXL-4, JXL-small for JXL-1,XL-2 “C”sharp wedge connector JXL-big for JXL-3,JXL-4 “C”sharp wedge connector ESTRUCTURAA 1. fixed handle 2. Free handle 3 .Cylinder body 4.Oil Pump 5.Pivot Screw 6.Unloading Device 7.Clamping head 8.Pision DIRECTIONS 1.According to the connector “C” of the body of the wedge point the type of tools. JXL-1, JXL-2 must use J... -
China OEM Stainless Steel Wire Rope Thimbles - composite polymer tension insulator – Waxun
FXBW-T-WQ Rod type composite bird proof insulator Introduction This product includes insulating Core, insulating housing & weather sheds and terminal assembly parts. 1. The Insulating Core: The insulating core is made of epoxy resin impregnated glass fiber by winding or extruding. Tensile strength is generally up to 1100Mpa or more, 3 times of the ordinary steel and 5 to 8 times of porcelain material. 2. The Housing and Weather Sheds: With the automatic silicone rubber injection molding... -
China wholesale High Voltage Three Core Cable Cleat Clamp - Strain clamp – Waxun
Material: steel/alloy Size: All Coating: Galvanized Purpose: Power distribution equipment -
Factory Free sample Copper Aluminium Bimetal Cable Lugs - CPTAU series pre-insulated bimetallic cable lugs – Waxun
Standard: EN 50483-4. NF C33-021 characteristic 1. Insulating dysprosium aluminum terminal material: copper ≥ 99.9%, aluminum ≥ 99.5%: 2. The insulating sheath is made of high-strength weather-resistant engineering plastic through injection molding; 3. The identification on the insulating sheath is clear, and the identification information includes the specifications of the die, the order and times of crimping, the cross-sectional area of the conductor, and the length of the stripped wire; 4.... -
Manufacturer of Cable Lug Type - Bimetal cable lug – Waxun
Overview Terminal connectors are used to connect tap conductor to power equipments (transformer, circuit breaker, circuit breaker, disconnect switch. etc ) or to all bushing of substation. Aluminum connectors are also used to connect the tap conductor of T-connector. The connectors inclede conpressive-type and bolted, both types have angle of 0°30°and 90°with the direction of tap conductor. DTL series Al-Cu connection terminal is suitable for transition joint of distribution device Aluminum c...
