Factory Supply Wedge Type Dead End Clamp - Ampact clamp installation tool – Waxun
Factory Supply Wedge Type Dead End Clamp - Ampact clamp installation tool – Waxun Detail:
Installation Steps
1. Insert the conductor and the wedge end into the groove until to the marking line.
2. Put The clamp on the gun seat and locate it, with wire thread insert. Make sure the end of the gun tightly top the wedge.
3. Remove the back cover of the gun and load the bullet core. Then install the back cover and tighten it.
4. Pull the rear cable to the right place and press the button. Bullet core firing,The push rod will push the wedge core into the
inner of the clamp
5. Remove the ejection gun and unscrew the rear cover, taking the bullet core out. Clean the inner and outer suface of the
tools, with prevention oil and put in the tool case.
Product detail pictures:
Related Product Guide:
We support our purchasers with ideal premium quality products and substantial level company. Becoming the specialist manufacturer in this sector, we've acquired rich practical working experience in producing and managing for Factory Supply Wedge Type Dead End Clamp - Ampact clamp installation tool – Waxun, The product will supply to all over the world, such as: Kuala Lumpur, Estonia, Accra, If you need to have any of our merchandise, or have other items to be produced, make sure you send us your inquiries, samples or in depth drawings. Meanwhile, aiming to develop into an international enterprise group, we look forward to receiving offers for joint ventures and other cooperative projects.
By Andy from Kuwait - 2017.05.02 18:28
The factory workers have a good team spirit, so we received high quality products fast, in addition, the price is also appropriate, this is a very good and reliable Chinese manufacturers.
By Anne from Liberia - 2017.08.18 18:38