Factory Cheap Hot Shear Head Bolt Connector - DTL-4 series Shear Bolt connectors – Waxun

Short Description:

Product Detail

Product Tags

Feedback (2)

continue to enhance, to be certain solution top quality in line with market and buyer standard requirements. Our corporation has a excellent assurance program are actually established for H Tap Connector, Shear Bolt Joint Connector, Power Line Insulators, We have four leading products. Our products are best sold not only in the Chinese market, but also welcomed in the international market.

Factory Cheap Hot Shear Head Bolt Connector - DTL-4 series Shear Bolt connectors – Waxun Detail:

Raw material

Made of pure copper and aluminum bars, the material is dense;

Connection method

The product is connected to the cable using a crimping process for reliable connection.

Use range and application field

It is suitable for connecting 35 KV (Um=40.5kV) and below power cable conductors to the end of the

electric device. Other wires and cables for fixed laying can also be used.

Structural features

▪ High mechanical strength: using high-strength aluminum alloy and T2 copper material, after heat treatment and welding, the tensile strength can reach 260MPa;
▪ Good electrical performance: Pass 1000 thermal cycles and 6 short circuit tests;
▪ Span design: one model is suitable for cables with multiple diameters, reducing inventory quantity;
▪ Constant crimping force: The torque bolt is equipped with a specific shearing torque, and the hexagonal head will automatically break when the preset is reached, and the wire will not be damaged;
▪ Simple installation: it can be installed with a wrench or socket wrench;
▪ Extend life: oil-blocking design, conductive paste is placed inside, effectively reducing contact resistance, anti-oxidation and anti-corrosion.

Product property: Due to the coupling effect when Aluminum comes in contact with Copper, corrosion wil happen in a short time. Currently the best solution is to use Aluminum-Copper bi-metallic connectors. A bimetallic lug should be used for termination. the friction welding is well done. its copper and aluminum are excessively located at the round bar (the inner pin type is generally located at the flat plate), so it has good mechanical strength and electrical properties. And its barrel capped is filled with joint electric compound TO avoid oxidization. the type test is in accordance with IEC 61328-1.

Selection table

model	Conductor cross-sectional area mm²	Фd(mm)	L(mm)	Number of bolts
DTL-4-16/95-12	16 ~ 95	24	86	2
DTL-4-50/150-12	50 ~ 150	28	100	2
DTL-4-50/150-16	50 ~ 150	28	100	2
DTL-4-70/240-12	70 ~ 240	33	121.5	2
DTL-4-70/240-16	70 ~ 240	33	121.5	2
DTL-4-120/300-12	120 ~ 300	38	133	2
DTL-4-120/300-16	120 ~ 300	38	133	2

Product detail pictures:

Related Product Guide:

It really is a good way to further improve our goods and service. Our mission would be to acquire inventive items to buyers with a very good encounter for Factory Cheap Hot Shear Head Bolt Connector - DTL-4 series Shear Bolt connectors – Waxun, The product will supply to all over the world, such as: Italy, Amman, Pakistan, Many products fully conform to the most rigorous of international guidelines and with our first-rate delivery service you will have them delivered at any time and in any place. And because Kayo deals in the entire spectrum of protective equipment, our customers don't need to waste time shopping around.

This company conforms to the market requirement and joins in the market competition by its high quality product, this is an enterprise that have Chinese spirit.

By Helen from Botswana - 2018.12.25 12:43

The supplier abide the theory of "quality the basic, trust the first and management the advanced" so that they can ensure a reliable product quality and stable customers.

By Eden from Panama - 2018.02.04 14:13