Cold Shrinkable Cable Termination Kit
Product introduction
The cold shrink termination has excellent cold and heat performance, especially suitable for high altitude and cold areas, wet areas, salt spray areas and in heavily contaminated areas.
▪ Integrated molding：Integral casting，no gaps，high-safety electric cable
▪ Good water-resistant: Three layer waterproof technology for terminal head, Ensure excellent sealing and moistureproof performance with fingertip, Insulating tube and a sealed off pipe
▪ Shrink and compact : Liquid silica gel is used as raw material, shrinkage is higher than that of solid raw materials
▪ The support bar can be pulled smoothly: High flexibility, easy to draw and not easy to break
| Rated voltage | 8.7/15KV |
| System frequency | 50HZ |
| Maxi operating voltage of the system | 12KV |
| Environment temperature | -20-+40℃ |
| Elevation | ≤1000m |
| External insulation pollution classes | IV |
| Type of cable accessories | Fully cold shrinkable |
| project name | Parameter |
| power frequency over-voltage value | 39KV, Without breakdown and flashover whin 5 min |
| partial discharge Reference value | 15KV<1PC, 15KV<1PC |
| compound cycle Reference value 3 cycles | 23KV, 10 times each in Positive and Negative polesWithout breakdown and flashover |
| Breakdown voltage reference value | 95KV, 10times each in Positive and Negative polesWithout breakdown and flashover |
| 15 min power frequency voltage reference value | 23KV, Without breakdown and flashover within 15 min |
| salt spray reference value（outdoors)Humidity reference value （indoors) | 11KV, 1000h, Without breakdown and flashoverNo voltage and mechanical damage |
Instructions for ordering
10KV Cold shrinkable cable accessories specification
| Wire section | Cold shrink outdoor terminations | Cold shrink indoor terminations | Cold shrinkable intermediate joint | ||||
| order number | wire section(mm² | single core | three-core | single core | three-core | single core | three-core |
| 1 | 25-50 | WLS-10/1.1 | WLS-10/3.1 | NLS-10/1.1 | NLS-10/3.1 | NLS-10/1.1 | NLS-10/3.1 |
| 2 | 70-120 | WLS-10/1.2 | WLS-10/3.2 | NLS-10/1.2 | NLS-10/3.2 | NLS-10/1.2 | NLS-10/3.2 |
| 3 | 150-240 | WLS-10/1.3 | WLS-10/3.3 | NLS-10/1.3 | NLS-10/3.3 | NLS-10/1.3 | NLS-10/3.3 |
| 4 | 300-400 | WLS-10/1.4 | WLS-10/3.4 | NLS-10/1.4 | NLS-10/3.4 | NLS-10/1.4 | NLS-10/3.4 |
